Look Keo Classic-3 Pedal

About Look Keo Classic-3 Pedal

 

The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.

 

A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation).

 

LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation). This test is far more grueling to the current industry standard, the EN14781.


USAGE -  Beginner to advanced

BODY - Composite

AXLE - Chromoly

THREADING - 9/16 X 20 mm

BEARINGS - 1 ball bearing, 1 needle bearing cartridge

PEDAL STACK HEIGHT - 15,7 mm

DISTANCE PEDAL SPINDLE / CRANK ARM - 53 mm

CONTACT SURFACE AREA - 400 mm²

FLOAT - 8 to 12 adjustable spring

CLEATS - Kéo Grip Cleats


Write a review

Note: HTML is not translated!
    Bad           Good

Look Keo Classic-3 Pedal

  • ₹4,490